When replacing brake pads on your Jeep Grand Cherokee, you have a few options. Choosing the right ones depends on their lifespan, cost, and performance. In this article, we’ll discuss what to look for and how to properly install them. Also, you’ll learn about the importance of torque wrenches.
Cost
The Jeep Grand Cherokee is a rugged truck. It was built with quality and durability in mind, so it’s important that the replacement parts you buy for your Grand Cherokee reflect that quality. Over time, the brake pads in your Jeep will wear down and need to be replaced. Brake pads work by pressing against the car’s rotor to transfer kinetic energy into heat energy.
Your driving habits and the type of brake pads you use will determine how often your brakes will need to be replaced. Depending on how often you drive your Grand Cherokee, brake pads can wear down at an accelerated rate. If you regularly drive at high speeds, the brake pads in the rear may need to be replaced more frequently than in the front.
The cost of replacing brake pads in a 2021 Jeep Grand Cherokee L will vary depending on how many you need and whether you want to do the job yourself. The cost of replacing a single front brake pad is usually between $75-$100, while a pair of rear brake pads can cost as much as $250. However, it’s important to remember that the prices may change due to availability of replacement parts. In addition, the cost of labor will vary from one city to another.
Lifespan
The life of your Jeep Grand Cherokee’s brake pads is dependent on several factors. This includes your driving style and the conditions in which you drive. You should regularly check the brake pads to see if they’re showing signs of wear. Then, replace them when necessary. This will keep your Jeep brakes in top shape for years to come.
Brake pads can last for between 30,000 and 50,000 miles depending on the driving conditions and their composition. Depending on the weight of the vehicle and how often you use your brakes, they may last longer. Make sure you check your owner’s manual for recommended maintenance intervals.
If you drive your Jeep Grand Cherokee off-road, make sure to get brake pads that are made for off-road use. It’s also a good idea to visit an AutoZone store if you are looking for replacement parts. They have free same-day store pickup and free engine diagnostics.
Performance
Performance Jeep Grand Cherokee brake pads are designed for maximum brake performance. They have a high initial bite and excellent heat resistance. These brake pads also feature a low water fade and low wear characteristics. A performance brake pad will enhance the braking power of your Grand Cherokee and give you a safe and smooth ride.
DBA offers a wide range of high-quality brake pads and rotors to suit your needs. Their HPS braking compound is designed for maximum stopping power on a street-legal vehicle and gives up to 20-40 percent more stopping power than stock brake pads. Moreover, the HPS braking compound has a higher coefficient of friction compared to stock brake pads, meaning less fade and less brake dust.
After installing your new brake pads, you should check the brake discs and calipers for any debris or oil. Also, check whether the rotors are clean and grease-free. Once you have checked everything, you should burnish the pads with moderate pressure and hard stops at 40 to 45 mph. Do not drag the brakes as the burnishing process can cause damage to the brake system. After 15 minutes, the new brake pads are ready for use.
Replacement
If you notice your Jeep Grand Cherokee making annoying squealing noises while braking, brake pads may need to be replaced. These noises are caused by the friction material on the brake lining being worn down. As a result, the wear sensors press against the brake rotor and cause the squealing sound. Thankfully, replacing your brake pads is a relatively simple task that requires only a few mechanical tools and some technical know-how. Plus, replacement brake pads are cheap compared to labor charges at local repair shops.
The first step in replacing your Jeep Grand Cherokee brake pads is to remove the old ones. To do this, unscrew the outer brake pad. The inner brake pad is attached to the brake caliper by metal clips located at the rear. You’ll need to remove the old pad from the bracket and unscrew it. Next, remove the worn indicator bar that sits at the bottom of the outer brake pad. Finally, compress the pistons backward to fit the new, thicker brake pads. Use a “C” or “F” clamp to evenly distribute the pressure.
Next, take note of any warning signs that your brakes are in need of replacement. In some cases, you’ll notice warning lights or messages on the dashboard. Generally, brake pads last between 30,000 and 50,000 miles. However, your mileage and driving style can affect their lifespan. Make sure you read your owner’s manual for more details.
