When changing brake fluid in your Honda, you should always use Honda brake fluid DOT 3. Non-Honda brake fluid can cause corrosion and reduce the lifespan of your system. To avoid this, use Honda Heavy Duty Brake Fluid DOT 3 in your brake system. Also, make sure to bleed your brakes before making any brake changes.
DOT 3 brake fluid
If you’re considering upgrading your Honda brake fluid, you should know that the DOT 3 brake fluid is a type specifically designed for the vehicle. It is made from a glycol-ether fluid that has a boiling point of about 400 degrees Fahrenheit. While non-Honda brake fluid can be used, it can cause corrosion and decrease the lifespan of your brake system. Instead, use DOT 3 brake fluid in your Honda’s brake system to get the best results.
If you’re thinking about replacing your Honda’s brake fluid, you should know that DOT 3 brake fluid is not compatible with DOT 4 or DOT 5. You can buy generic Honda brake fluid and compare it to DOT 4, but if you want to be absolutely sure, you can try using DOT 5 brake fluid. This will provide you with a more accurate number.
It is important to replace your brake fluid in a timely manner, as the brake system is put under significant stress by driving and braking. The fluid can easily become contaminated and lose its effectiveness. This is why Honda recommends replacing the brake fluid in your Honda every three years. Fortunately, there’s an easy way to do this: by using Honda Genuine Brake Fluid. This brake fluid is specifically formulated to work with Honda’s braking system and contains moisture inhibitors to help keep a consistent level of lubricity during any driving conditions. Moreover, it contains top-quality ingredients and is designed to last a minimum of three years.
Although Honda recommends changing brake fluid every three years, you should always read the owner’s manual to be sure of what’s required.
Non-Honda brake fluid
If you’ve ever wondered why your Honda car uses non-Honda brake fluid, you’re not alone. The truth is that Honda doesn’t make the brake fluid itself. It likely gets it from a company that markets it under many labels. This is bad news for your car and your wallet. You don’t want to spend money on brake fluid that won’t work right.
First, avoid using non-Honda brake fluid. Not only is non-Honda brake fluid not compatible with Honda vehicles, but it also decreases the longevity of the brake system. Honda recommends using DOT3 brake fluid, and the owner’s manual specifically warns against using non-Honda brake fluid.
Non-Honda brake fluid can also cause damage to your vehicle’s brake system. While some brands of non-Honda brake fluid contain additives that can damage your car, a Honda-branded fluid is specifically made to work with your vehicle. It has additives designed to lubricate and protect Honda parts. Generic fluids must accommodate a much wider range of vehicles and may contain additives that are not necessary for your car.
Another important factor to consider when choosing brake fluid is your car’s type. The Honda brand uses DOT3 brake fluid, and it is easy to find. This type of fluid is available at almost any automotive parts store or big box automotive retailer.
Bleeding the brakes before changing
In order to change the brake fluid in your Honda, you must first bleed the brakes. The procedure for bleeding your brakes is simple. First, you have to loosen the bleeder screw on the brake caliper that is farthest from the master cylinder. Use a wrench or penetrating oil to loosen it. Next, insert a small piece of tubing into the bleeder screw, making sure that it is at a height that is high enough to reach the jar. You need to repeat this process until the fluid is clear and bubble-free.
The bleeding process for individual calipers is similar to that of the master cylinder. Once you’ve removed the old fluid from each caliper, you can open the bleeder valve and allow the fresh fluid to circulate through the system. If you’re not comfortable doing it, you can ask a second person to help you out. It is also a good idea to bring the car to a mechanic if you’re unsure of how to perform this task.
It’s also important to change Honda brake fluid according to the manufacturer’s recommendations. The recommended interval for changing brake fluid is every 30,000 miles. You can also check the owner’s manual for details. Always remember that different types of brake fluid do not mix well with each other. Therefore, before you begin working on your Honda brakes, be sure to purchase the correct type of fluid. Fortunately, good quality brake fluid isn’t that expensive, and the amount you need is minimal. Usually, you’ll need two or three 12-ounce cans to complete the task.
