If you find yourself in a situation where your car won’t start because its brakes are locked, don’t panic. It’s actually a fairly common problem and can usually be easily fixed. All you need is a bit of patience and the right knowledge. This article will explain the steps you need to take to get your car running again.
Check the Brakes
The first step is to make sure the brakes are actually locked. This can be done by checking the brake pads. If the pads are worn down or warped, the brakes might be locked and preventing your car from starting. You can also check the brake fluid level and make sure it isn’t leaking. If you find that the brakes are indeed locked, you’ll need to take further steps to get your car running again.
Release the Brakes
Once you’ve determined that the brakes are locked, the next step is to release them. This can be done by first jacking up the car and then removing the tire and wheel. Once the wheel is removed, you should be able to access the brake calipers. To release the brakes, you’ll need to use a wrench to loosen the caliper bolts and then pull the calipers away from the brake rotor. Once you’ve done this, the brakes should be released and you can put the tire and wheel back on.
Check Other Components
After releasing the brakes, you should also check the other components of your car to make sure everything is in working order. This includes checking the battery, starter, spark plugs, and fuel system. If any of these components are faulty, it could be preventing your car from starting. You may also need to check the fuel pump and fuel filter to make sure there aren’t any blockages.
Start the Car
Once all the components have been checked and are functioning properly, you should be able to start your car. If the engine still won’t turn over, you may need to get it checked by a mechanic. They can pinpoint the exact cause of the problem and get your car running again.
In conclusion, fixing a brake locked car that won’t start is a fairly straightforward process. All you need is the right knowledge and tools. First, check the brakes to make sure they are actually locked. Then, release them by loosening the caliper bolts and pulling the calipers away from the rotor. Finally, check all other components of the car and start it up. With a bit of patience, you should be able to get your car running again.
